The Difference Between Aiming Beam and Operating Beam

      In lasers, there are usually two different types of beams that you should know about: the Aiming Beam and the Operating Beam. Here’s how they differ:
 

  1. Aiming Beam:

    • Purpose: The aiming beam is used to help position or direct the operating beam. It's like a guide to show you where the laser will go.
    • Example: Think of a laser pointer used in presentations—this is similar to an aiming beam.
    • Power: The aiming beam is usually low-powered and often appears as a red light. It’s generally considered "eye-safe," meaning it’s less likely to cause harm to your eyes.
       
  2. Operating Beam:

    • Example: The operating beam is the actual working laser that performs the task, like cutting, welding, or marking.
    • Power: This beam is much more powerful and requires proper laser safety protection because it can be harmful to your eyes and skin.
       


       

Important Safety Tips:

  • Always assume the aiming beam could be dangerous, even if it’s low-powered. Never look directly into any laser beam, including the aiming beam.
  • When working with lasers, use proper laser safety products, such as laser safety glasses, to protect your eyes. If you're not sure whether the aiming beam is safe, check with a laser safety officer or an expert.
  • Remember, laser safety products is there to protect you from accidental exposure, not for intentionally looking at the beam. 

 

 

Created on:2024-08-06 13:10